![Fogh Marine HOBIE FOX Assembly Manual Download Page 12](http://html1.mh-extra.com/html/fogh-marine/hobie-fox/hobie-fox_assembly-manual_2314699012.webp)
67(33,1*7+(0$67
Place the mast foot on the
mast base and place the pin in
it. This prevents the mast from
leaving its base when lifted.
Check that the wires are not tangled.
Then, with one person on the trampoline, the
second person lifts the mast by the top and
moves down the mast until the person on the
trampoline can take the mast on their shoulder.
Then this person pushes his feet against the rear
crossbar and pushes the mast forward with the
weight of his body.
The first person is to push the mast up as far as pos-
sible, walking ahead on the trampoline as the mast is
raised.
The second person can
now take the forestay,
make sure it is not tan-
gled and pin it into one of the
top holes of the furler mounted
stay adjuster.
Once the mast is secure remove the bolt from
the base of the mast and stow it in a secure
place. You will need the bolt later for safe lowe-
ring of the mast.
Now you can affix the cunnin-
gham blocks to the brackets
on each side of the mast.
NB
: FOR THE FIRST FEW TIMES YOU
RAISE THE MAST IT IS RECOMMENDED
YOU USE 3 PEOPLE FOR EXTRA SAFETY.
Fogh Marine | 416 251-0384 | www.foghmarine.com | [email protected]