TView Silver User’s Guide
8
Hardware Installation
Note: In order to see the video output on both the computer
monitor and TV simultaneously, you will need to be using
an Apple 12", 13", or 14" monitor. If your monitor is
larger than 14", it must be multisync (capable of running
at various frequencies). Refer to your Macintosh
documentation if you have any questions regarding the
type of monitor you are using.
•
A TV/monitor, VCR or any video device that can display or
record NTSC video.
Pre-Installation Procedures
Before installing the hardware, you must unpack and inspect the
equipment. This section discusses the steps for unpacking and
inspecting the equipment.
Unpacking the Hardware
Follow these general rules when unpacking the hardware and
software disks for installation:
1.
Place the box in an upright position.
2.
Open the top of the box.
If you use a razor blade or sharp object to open the box,
be sure not to cut too deeply. Doing so may scratch or
otherwise damage the TView Silver or cables.
3.
Remove all packing and written materials.
