TView Silver User’s Guide
Chapter 2
15
TView Silver. It is not possible to connect directly to this input. If this
is the only input available, and you do not have a VCR, this input can
be used with an RF modulator. See below for further information.
To connect the TView Silver unit to your television, perform the
following steps:
1.
Connect one end of the supplied composite video cable or S-
Video cable to the port at the rear of the TView Silver labeled
either "Comp Video" or "S-Video."
2.
Connect the other end of the composite cable or S-Video cable
to the Comp Video in or S-Video in port at the rear of the
television.
3.
Turn the television on.
4.
Turn the TView Silver on.
5.
Turn your computer on. If the cables have been connected
correctly, the image from the computer monitor should now
appear on the television screen.
