TView Silver User’s Guide
Chapter 2
19
Figure 2-6: Connecting the TView Silver to a VCR
Connecting to a VCR Using an RF
Modulator
If you do not have a VCR with composite video or S-Video inputs,
you will need a special adapter called an RF Modulator. This device
converts the Composite Video signal from the TView Silver unit to an
antenna signal. The RF Modulator is not supplied. FOCUS
Enhancements Technical Support recommends using the Radio
Shack RF Modulator (Radio Shack part number 15-1283).
To connect the TView Silver to your VCR using the RF
Modulator, perform the following steps:
1.
Connect the RF Modulator to the coaxial cable input at the rear
of the VCR.
2.
Connect one end of the composite video cable to the port
labeled "Comp Video" at the rear of the TView Silver unit.
3.
Connect the other end of the composite video cable to the RF
Modulator’s composite input and then to the rear of the VCR.
S-video
Video In
S-Video (Recommended)
Composite Video
