TView Silver User’s Guide
Chapter 2
17
Note: When using an RF Modulator, the TV may have to be set
to a particular channel (for instance, 3 or 4) to accept the
TView Silver’s video. Or, in some cases, you may have
to specify input using the TVs on-screen programming
feature. If you are unsure about how to set your
television to accept external video through the Antenna
In, refer to the television owner’s manual.
To connect the TView Silver to your television using the RF
Modulator, perform the following steps:
1.
Connect the RF Modulator to the coaxial input at the rear of the
television.
2.
Connect one end of the composite video cable to the port
labeled "Comp Video" at the rear of the TView Silver unit.
3.
Connect the other end of the composite video cable to the RF
Modulator’s Composite Input at the rear of the television.
4.
Plug RF modulator into wall outlet or surge protector
5.
Turn your computer on.
6.
Turn the TView Silver on.
7.
Turn the television on. If the cables have been connected
correctly, the image from the computer monitor should now
appear on the television screen.
Connecting the TView Silver to a VCR
In certain configurations, the video will be run through a VCR.
