www.fmiproducts.com
125898-01D
4
structure. Locate propane/LP supply
problems, do not use propane/LP fuel tank
of less than 100 lb. capacity.
2. If you smell gas
use any phone in your building
a neighbor’s phone. Follow the gas sup-
plier's instructions
4. Turn fireplace off and let cool before
servicing, installing or repairing. Only a
-
service person.
5. You must keep control compartments,
burners and circulating air passages
clean. More frequent cleaning may be
needed due to excessive lint and dust
from carpeting, bedding material, etc.
Turn off the gas valve and pilot light before
SAFETY
Continued
6. Have venting system inspected annually
have venting system cleaned or repaired.
See
Cleaning and Maintenance
, page 28.
7. Do not use any solid fuels (wood, coal,
-
place nameplate.
8. This appliance, when installed, must be
electrically grounded in accordance with
local codes or, in the absence of local
codes, with the
National Electrical Code,
ANSI/NFPA 70 or Canadian Electrical
Code, CSA C22.1.
exposed to or under water. Immediately
for replacement of the unit.
removed, cracked or broken.
11. Provide adequate clearances around air
openings.
LOCAL CODES
local codes. In the absence to local codes,
use the current
National Fuel Gas Code ANSI
Z223.1/NFPA 54*
CSA-
B149.1 Installation Code
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
