www.fmiproducts.com
125898-01D
22
DOOR
see
Parts
If replacement of glass is necessary, the entire
frame assembly must be replaced. Gloves
must be worn when removing/replacing glass
door. If glass is broken tape remaining glass
onto frame before removing.
1. Remove bottom access panel.
provided.
3. Hook opener over latch as shown in Fig-
ure 27. Swing the bottom of the opener
down toward the door. You will not need
to pull down.
4. Tilt open glass door 45° from the top of
FIREPLACE INSTALLATION
Continued
the OFF position.
valve to gas valve (see Figure 24 or
forming show a leak. Correct all leaks at
once.
Operation
To Turn Off Gas to
Appliance
FINISHING FIREPLACE FOR
INSTALLATION
panel semi-installed. If you will be using the
-
place to a see-thru, the rear panel will need to
be removed (See
Upgrading (V)LDV43 Series
to See-Thru Application
1. Using self-tapping screws provided and
holes on rear panel as a guide, screw
in Figure 26.
Figure 27 - Latch Opener
Figure 26 - Installing Rear Panel for
Regular Applications
