www.fmiproducts.com
125898-01D
23
FIREPLACE INSTALLATION
Continued
Figure 29 - Removing Rear Panel for
See-Thru Applications
Figure 30 - Removing for See-Thru
Applications
opening tilting top of door about 45 to-
door into the retaining channel at the
3. Secure 3 top door latches.
touches ember material. Do not block air
slots by using too much ember material
in one area. Do not block pilot ports with
embers. It is not necessary to use all of
the glowing ember material provided.
APPLICATION
top of rear panel and remove as shown in
Figure 29. Discard screws and rear panel.
2. Unscrew mount bracket from top face as
shown in Figure 30. Discard mounting
bracket and replace screws.
GLOWING EMBERS AND GLASS
PEBBLE INSTALLATION
Replacement
Parts
Glowing embers and glass pebbles are in-
while glass doors are open and/or removed.
1. Place glass pebbles in a single layer
evenly on the pebble pan. Make sure not
to place any on the burner in the center
of the pebble pan or on the pilot.
2. Pull glowing ember material apart into
pieces no larger than a dime. Place these
pieces loosely and sparingly directly onto
exposed burner ports. This will create
Figure 28 - Removing/Replace Glass Door
Glass
Door
Door Latches
