www.fmiproducts.com
125898-01D
24
FIREPLACE INSTALLATION
Continued
glass door. Refer to
Removing/Replacing
Glass Door
, page 22 of this manual for
instruction. Discard false door.
Refer to
Removing/Replacing Glass Door
,
page 22 of this manual when removing
glass door.
-
3. Remove 2 side walls and then the rear
wall. Discard rear wall.
4. Replace 2 side walls and reinstall the
corner brackets.
5. Reinstall front glass door.
1. Install second glass door in the rear of
Removing/Replacing
Glass Door
, page 22 of this manual.
Brackets
1. Screw access door retaining brackets into
the inner side face using 2 screws on both
the left and right side as shown in Figure
32.
right side as shown in Figure 33.
Figure 31 - Removing Rear Interior Wall
for See-Thru Applications
Figure 33 - Installing Side Face Filler for
See-Thru Applications
Figure 32 - Installing Access Door
Retaining Brackets for See-Thru
Applications
Retaining
Bracket
1. Place access door into rectangular open-
ing in front of the glass door with the
slanted side facing forward. The slanted
the bottom face Insert tabs on side of ac-
cess door into slots on retaining brackets
Rear
Panel
Side
Panel
Bracket
