www.fmiproducts.com
125898-01D
32
Once the timer is set to the desired number
7 seconds and then go into the timer setting
and start to count down.
The user can press the "SET" button and
the system will immediately start the TIMER
function.
If the "TIMER" button is pressed again while
the timer is counting down the "TIMER" will
be terminated.
If the OFF mode is activated the "TIMER" will
be terminated. OFF is OFF in all cases.
Thermo Mode
Selection of the THERMO or Thermostat
mode with the MODE button will light the
SET number will be 45F, and with UP or
DOWN keys you can SET the temperature
that the user would like the room to maintain.
Once the SET temperature is correct, within
5 seconds of time, the appliance will operate
to that Set Temperature.
on the LCD screen. At this point the appliance
will be burning. The user will not have to oper-
ate the "SET" button to set the temperature.
But if the SET button is pushed, it also com-
pletes the process for setting temperature.
You can use DOWN or UP buttons to obtain a
new desired temperature. Simply use the UP
and Down buttons to set the new temperature
and the appliance, within 5 seconds, will turn
ON or OFF and will still show THERMO on
the LCD screen
Another short push of this MODE button will
cancel the THERMO function. In another
words, a short push of MODE button will de-
activate THERMO function, and the appliance
will be OFF.
The control will have an additional feature to
as the set temperature is obtained.
The outline of the turn down will be based on
the degrees under the setting temperature.
The coding will be like the following.
Set Temperature will be from 45F to 99F
burner, that is controlled with a step motor on
the gas valve.
-
ing information from the handheld control. It is
very important to remember that our factory
setting of SWING TEMPERATURE is 2 de-
grees. Addition of this feature will not allow this
SWING to be change as with current designs.
SET TEMPERATURE
Flame Level
74 F
OFF
73 F
1
72 F
2
71 F
3
70 F
4
69 F
5
68 F
6
67 F
7
select/operate or de-activate the PROGRAM
mode. A long push (push & hold for more than
Setting of PROGRAM mode.
Following are the Factory setting for the
PROGRAM mode:
M T W T F
OFF
-
9:00am
OFF
-
8:00pm
SS
OFF
-
10:00am
OFF
-
9:00pm
GAS CONTROL MODULE SYSTEM
Continued
