Fluke DTX-1800, Technical Reference Handbook

Page: 320 / 398

DTX Series CableAnalyzer
Technical Reference Handbook
13-4
Working with Folders
You can create folders for each job to organize your test
results. The tester saves test results in the folder you select.
Creating a New Folder
To create a new folder:
1 Turn the rotary switch to SETUP.
2 Use
D
to highlight Instrument Settings; then
press
H
.
3 DTX-1800, DTX1200: Verify that the Result Storage
Location shows the location where you want the new
folder. Change the location if necessary.
4 On the Instrument Settings screen, use
D
to
highlight Current Folder; then press
H
.
5 Press
J
Create Folder.
6 Use the softkeys,
BCAD
, and
H
to enter
a folder name. Press
N
when you are finished.
Changing Folders
To change the current folder:
1 Turn the rotary switch to SETUP.
2 Use
D
to highlight Instrument Settings; then
press
H
.
3 DTX-1800, DTX1200: Verify that the Result Storage
Location shows the correct location. Change the
location if necessary.
4 On the Instrument Settings screen, use
D
to
highlight Current Folder; then press
H
.
5 Use
AD
to highlight a folder name; then
press
H
.
Note
Changing folders from the View Results screen in
SPECIAL FUNCTIONS does not change the current
folder in SETUP.