Fluke BP Pump 2 Operators, Operator'S Manual

Page: 59 / 82

Operation
Auto Sequences
3
3-23
Printing Auto Sequences
Use the following steps to print an auto sequence definition.
Note
Refer to ‘Setting up the Tester” for printer output setup instructions.
1. To determine which tests and simulations are defined in an auto sequence,
press the
AUTO SEQUENCE
soft key to access the
Auto Sequence
menu.
A u to Se qu ence
EDIT PRI N T RU N
fas36.eps
2. Press the
PRINT
soft key. The
Select Auto Sequence (1-9)
screen
appears.
Select A u to Se qu ence: 1
fas42.eps
3. Press a numeric key (
1-9
), followed by the
ENT
key.
Figure 3-7 shows a typical generated auto sequence printout.