Fluid BID1000W, Instructions Manual

Page: 12 / 20

Neutral cleaner
When there is dirt on the nozzle, maintain it according to the following methods:
1.
When no one is seated, turn the knob forward (press Rear Cleaning Button on the main unit), then
nozzle rod is extended, and manually clean with a rag or soft brush.
2.
Nozzle can be removed and cleaned separately. (Hold the nozzle rod in one hand and pull the nozzle
out withthe other hand)
3.
Put back the nozzle, and then press the knob button (Stop button) on the main unit or the "Stop"
button on theremote control, the guided rod retracts.
Filter washer Maintenance
Tips: Do not pull the nozzle rod to prevent the
damage of the nozzle rod and motor.
Maintenance of Main Unit
Daily Maintenance
1. Turn off the power during maintenance of this machine.
2.
Wipe the dirty area with a soft cloth that is wrung out of water.
3. After wiping, please turn on the power again.
Tips: Do not rinse the surface of the product
directly with water during maintenance.
Maintenance of the Nozzle
Time for maintenance: It is under normal water
pressure but poor flush performance occurs.
1.
Turn off the angle valve.
2. Unscrew toilet water inlet pipe and seat
water inlet pipe.
3. Take out filter washer
4.
Brush filter washerwith toothbrush and
clean filter washer
5.
Re-install filter washer, then re-install
water inlet pipe
3-way
connector
Filter
washer
Connect to toilet
water supply pipe
Connect to seat water
inlet pipe