Fluid BID1000W, Instructions Manual

Page: 9 / 20

Installation of Main Unit
Product Size and Installation Preparation Tool
403mm
380mm
130-190mm
517mm
434-493mm
＞
490mm
＞
25
＜
90
Wrench Phillips screwdriver
Cup Tape measure
1 2
Screws
Fixed piece
Expansion nut
Installation of base Installation and disassembly of Main Unit
* This product has been tested for water flow before leaving the factory. There may be a small amount of
residual water dripping out when removing the product, which is not a malfunction.
* Do not install this product in a wet place such as a bathroom, and do not put it in a place prone to water.
Install
base plate
Toilet mounting
holes
Install
mounting
cardboard
The black latch faces
forward, groove up
Install the expansion nuts into the toilet mounting holes first,
and then install base plate, fixed piece and screws in sequence
according to the above illustration, then tighten.
Disassemble
Click
click
* Tips: Please confirm this seat fitting your current toilet.
Installation of Main Unit: Align main unit to base plate and push it
into the base plate, and a “click” sound means the main unit is
installed in place. Disassembly of Main Unit: Press the
"Disassemble button", and pull out the main unit when a "click"
sound is heard.
* Hand can leave “Disassemble button” after press it to pull out
main unit.