3.15 Show Data?
This menu item will start the data list scrolling on the
front of the LCD display.
DISPLAY
PRESS
Run?
ENT
Show Data?
ENT
Set up list first!
Push ENT to continue
If you get the following, you have not set the display list of
data, and should refer to Section 3.16.
3.16 Setting up the Data Display
During normal operation, the instrument may be set up to
display the important operating data such as flow rate,
temperature, or pressure. The following data can be
scanned and displayed on the front panel of the instru-
ment:
1. Time & Date
Current Time and Date
2. Flow Rate
In rate units per minute or hour
3. Mass Flow
In mass flow units per minute or hour
4. Heat Flow
In heat flow units per minute or hour
5. Totalizer (Flow) Compensated accumulated flow
6. Totalizer (Mass) Compensated accumulated mass flow
7. Totalizer (Heat) Compensated accumulated heat flow
8. Temperature
Scaled in engineering units
9. Pressure
Scaled in engineering units
Continued on next page.
3-32
