|
34
MN301905 Rev A
Configuration
(with Display, continued)
Step Five
STEP 2 - SET THE UNITS OF MEASUREMENT
This function sets the units for all measurement values to be entered into the sensor.
1) From the Main Screen, press
Enter
to advance into
the Main Menu.
2) Press
Right Arrow
repeatedly until the arrow is
next to Service.
3) Press
Enter
to advance into the Service menu (and
Echo curve will appear).
4) Press
Right Arrow
repeatedly until the menu
shows Units of Measurement.
5) Press
Enter
to advance into Units of Measurement.
6) Press
Right Arrow
to change the setting between
feet [ft (d)] and meters [m (d)].
7) When the units are correct, press
Enter
to save the setting.
8) When done, press
ESC
to return to the Main Menu, and press
ESC
a second time to return to the Main
Screen.
