MN301905 Rev A
31
|
Configuration
(with Display, continued)
Step Five
USING THE DISPLAY
The display module features a dot matrix LCD display with 4 push buttons on a
removable puck. Out of the box, the display indicates level in feet and depicts
the level within the 4-20mA span on a bar graph at the right side of the display.
The four buttons perform the following functions:
ESCAPE
o
Exit configuration mode
o
Return to a higher menu level
o
Display Echo Curve
Up Arrow
o
Modify parameter values
o
Choose display mode
Right Arrow
o
Choose configuration options
o
Choose parameter digits to edit
o
Display contents of parameters
ENTER
o
Enter Menu and Options
o
Confirm configuration options
o
Confirm changes to parameters
MENU INTRODUCTION
1) To enter the Main Menu (from the Main Screen), press the
ENTER
button.
2) Use the
Right Arrow
button to scroll through the Main Menu options.
a) Configuration - Below are the configuration menu functions:
i) Sensor Height
ii) Fill-Height
iii) Medium
iv) Dampening
v) Output Mapping
vi) Scaled Units
vii) Scaling
viii) Max. Range
ix) Dead Band
x) Sensor ID
b) Display - This menu function sets the display mode and contrast.
c) Diagnostics - Below are the diagnostic menu functions:
i) Measurement of Peak Values
ii) Measurement Status
iii) Echo Curve
iv) Simulation
d) Service - Within the service menu functions, you can store a False
Echo Curve, set units of measurement, change output settings, reset
configuration settings, set language or set a PIN for the sensor.
e) Info - This item provides information on the sensor’s type, serial
number, date of manufacture and software version.
3) To select one of the functions, press
ENTER
.
4) To exit the programming mode, press
ESC
.