FLIR QUASAR CP-3211, User And Installation Manual, Page: 81 / 164

73
September 12, 2016
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
9.3.3.3 SNMP
The Simple Network Management Protocol (SNMP) enables the camera to be monitored and managed
remotely by the network management system. SNMP configuration settings are entered in the
System >
Network > SNMP screen.
SNMP Settings Screen
SNMP v1/v2
· Enable SNMP v1 or Enable SNMP v2 – Select the version of SNMP (v1 or v2) to use by checking
the relevant box.
·
Read Community – Specify the community name that has read-only access to all supported
SNMP objects. The default value is public.
· Write Community – Specify the community name that has read/write access to all supported
SNMP objects (except read-only objects). The default value is private.
SNMP v3
SNMP v3 provides important security features including:
· Confidentiality – Encryption of packets to prevent snooping by an unauthorized source.
·
Integrity – Message integrity to ensure that a packet has not been tampered with in transit
including an optional packet replay protection mechanism.
· Authentication – To verify that the message is from a valid source.
To enable the SNMP v3 protocol, enter the appropriate data and passwords requested:
· Enable SNMP v3 – Select the checkbox.
·
Security Name – See note below.
· Authentication Type – Select MD5 or SHA from the drop-down list. See note below.
·
Authentication Password – See note below.
· Encryption Type – Select DES or AES from the drop-down list. See note below.
·
Encryption Password – See note below.