FLIR QUASAR CP-3211, User And Installation Manual, Page: 132 / 164

September 12, 2016
124
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
Camera – Misc1 Screen (all units except CP-4221-30x)
BLC (Backlight Compensation)
Backlight compensation is used in images where a bright light source is behind the subject of interest.
Without backlight compensation, the subject would normally appear in silhouette. The backlight function of
the camera allows it to adjust the exposure of the entire image to properly expose the subject in the
foreground. Select
On or Off. The default setting is Off. Click Set to confirm the new settings.
Sharpness
Increasing the sharpness level can make the image look sharper, especially enhancing the object’s edge.
Select from the range between
0 to +15 . Click Set to confirm the new setting
ExpComp
You can define the value of Exposure Compensation. From the drop-down list, select a value from 1 to 15 .
The default is 8 . Click Set to confirm the setting.
Flip
You can track an object continuously when it passes under the camera by selecting M.E. (Mechanical) or
Image (Digital Flip) mode from the drop-down list. Select Off if you do want to use this function. Click Set
to confirm the setting.
§
M.E. mode – M.E. is a standard mechanical operation. As the dome camera tilts to the maximum
angle, it pans 180° and then continues tilting to keep tracking objects.
§ Image mode – In Digital Image Flip mode, the camera seamlessly tracks objects.