FLIR QUASAR CP-3211, User And Installation Manual, Page: 50 / 164

September 12, 2016
42
Installation
CP-3211/CP-4221 User and Installation Guide
Tools required:
§ Stainless steel strap cutter
§ Phillips and flat-head screwdrivers
To install the standard/compact wall mount with pole thin/wide direct mount
1. Fasten the pole thin/wide direct mount to a pole with the supplied stainless straps.
2. Thread the cables through the pole thin/wide direct mount.
3. Attach the standard/compact wall mount to the pole thin/wide direct mount using the
supplied screws and washers.
4. Thread the cables through the standard/compact wall mount with the cables coming out of the
pendant mount’s outlet. For outdoor cameras, attach the waterproof gasket to the pendant
mount.
5. After threading the cables, block the entry hole with the supplied sponge to prevent insects
from entering. See Standard or Compact Wall Mount , Step 3.
6. Thread the cables through the indoor or outdoor mount kit and attach the mount kit to the
standard/compact wall mount using the supplied screws and washers.
7. For outdoor cameras, adjust the waterproof gasket to the joint.
8. Connect the cables to the camera.
9. Secure the camera to the indoor or outdoor mount kit.
10. Ensure the camera is fixed completely, and that the thread holes on the camera’s fixing plate
and the mount kit are aligned.
11. Screw in the supplied screw and washer.
Pole Direct Mounting: Pole Thin/Wide Direct Mo Standard Wall Mount + Mount Kit