FLIR QUASAR CP-3211, User And Installation Manual, Page: 113 / 164

105
September 12, 2016
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
9.4.2 Video Compression
From the Video Compression page, you can specify MJPEG and H.264 compression settings.
Video Compression Screen
MJPEG Compression Setting
A higher value implies higher bit rates and higher visual quality. The default setting of the MJPEG Q factor
is 35. The setting range is from 1 to 70. Click
Save to confirm the setting.
H.264 Compression Setting
The default setting of H.264-1 is 4096. The default setting of the second streams is 1024 kbps. Each
stream can be configured individually. The setting range is from 64 to 8,192 kbps. Click
Save to confirm
the setting.
Note:
The second stream is limited to 2,048 kbps
Compression Information Setting
Select the checkbox to display compression information on the Home page. The default setting is Display
compression information in the home page . Click Save to confirm the setting.
CBR Mode Setting
If available bandwidth is limited, select CBR (Constant Bit Rate) mode. To operate the camera in Variable
Bit Rate (VBR) mode, uncheck the CBR checkbox. Click
Save to confirm the setting.
Note:
CBR mode affects image quality.