FLIR QUASAR CP-3211, User And Installation Manual, Page: 56 / 164

September 12, 2016
48
Configuring Communication Settings
CP-3211/CP-4221 User and Installation Guide
7. Right-click the camera whose network property is to be changed. From the context menu that
opens, select
Assign IP . The Assign IP dialog is displayed.
DNA Assign IP – Use DHCP Dialog Box
Tip:
Record the camera’s MAC address for future reference.
8. To access DNA, do one of the following:
a. For DHCP (not supported by Latitude):
i. Select Use DHCP . Do not use for Latitude.
ii. Click Update and wait for status.
b. For Static IP (recommended for Latitude users):
DNA Assign IP – Static IP Dialog Box
iii. Do not select the Use DHCP checkbox. This is recommended for security purposes
and for and Latitude users. In the IP Address, Gateway, and Netmask, enter the
respective LAN/VLAN (optional DNS) values.
iv. Click Update and wait for OK status to be displayed.