FLIR QUASAR CP-3211, User And Installation Manual, Page: 119 / 164

111
September 12, 2016
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
9.5.1 Preset
The PTZ tab opens on the Preset Point screen.
Preset Point Screen
From the Preset Point page, you can program up to 256 Preset Points to target a specific view in the Live
View pane.
To program a Preset Point
1. Move the cursor to the Live View pane.
2. Left-click and drag the red pointer to the desired position.
3. Adjust the fine zoom/focus ratio.
4. Under
Preset setting , assign an unused number to the Preset Point from the drop-down menu. Click
PrePage or NextPage for additional numbers.
5. In the Name text box, enter a friendly name for the Preset Point.
6. Click Set to save settings.
To move the camera to a Preset position
1. Under Preset go , select the desired Preset Point from the Preset drop-down menu.
2. Use the PrePage or NextPage buttons located under Preset setting for additional numbers. The
camera moves to the target position.
To delete a Preset
1. Select the desired Preset Point from the drop-down menu.
2. Click
Delete to remove the Preset.