FLIR QUASAR CP-3211, User And Installation Manual, Page: 39 / 164

31
September 12, 2016
Installation
CP-3211/CP-4221 User and Installation Guide
5. Screw in the supplied standard screw (security screw for vandal-proof dome) on the
dome cover.
5.3.2.4 Straight Tube Mounting Kit
The straight tube is available in two lengths: 25cm (10 inches) and 50cm (20 inches).
Items needed:
§ Indoor pendant mount kit or outdoor mount kit (standard with outdoor cameras)
§ Straight tube mounting package (FLIR camera mounting option available separately)
§ Screws and screw anchors for fixing the straight tube onto the ceiling (not provided)
Straight tube mounting package contents:
§ M8x12 screw x1
§ Spring washer 8 x1
§ Pendant tube washer x1
§
Waterproof rubber gasket x1
Tools required:
§ Drill
§
Phillips and flat-headed screwdrivers
To install the straight tube mount
1. Ensure that the ceiling can support the weight of the camera and straight tube.
2. Cut a cable access hole in the ceiling.
3. Attach the straight tube to the ceiling with the appropriate screws and screw anchors (not
provided). For outdoor cameras, attach the waterproof gasket to the straight tube.
4. Thread the cables through the straight tube and the indoor or outdoor mount kit.
5. After threading the cables, block the entry hole with the supplied sponge to prevent insects
from entering.
6. Attach the indoor or outdoor mount kit to the straight tube with the supplied screws and
washers.