FLIR M3100 SERIES Instruction Manual Download Page 63

Page: 63 / 178

Using the Main Menu

To configure Motion Detection events:

1. From the Main Menu, click

and then click

Event>Motion>Motion Detect

2. Under

Channel

, select the channel you would like to configure.

3. Check

Enable

to enable motion detection on the selected channel.

4. Click

Setup

next to Region to configure which areas of the image will be enabled for

motion detection. A grid will appear on the monitor.

Motion Grid

•

Areas enabled for motion detection are shown in color and areas that are disabled are transparent.

•

You can set up to 4 motion detection areas and customize the sensitivity and threshold for motion de-

tection separately for each one. Hover the mouse at the top of the screen to select which motion

area you would like to configure.

•

Right-click when finished.

5. Under

Anti-dither

, enter the anti-dither time. After a motion event occurs and motion

stops, if motion is detected within the anti-dither time, the system continues the motion
event and includes the new motion within the first event, rather than creating a new
motion event.

6. Under

Post_REC

, enter the time the system will record after a motion event occurs.

#LX400028; r. 1.0/16141/16141; en-US

Summary of Contents for M3100 SERIES



















































































































































































Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands

FLIR M3100 SERIES, Instruction Manual

Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands