FLIR M3100 SERIES Instruction Manual Download

Page: 19 / 178

Basic Setup (M3100 Series)

6.1

Step 1: Connect the BNC Cameras

• Connect FLIR MPX cameras to the

Video Input

ports on the rear panel of the DVR.

Note

The system is compatible withFLIR MPX cameras only.

Push and twist the BNC connector clockwise to secure it to the BNC port.

6.2

Step 2: Connect the Mouse

• Connect a USB mouse (included) to one of the

USB

ports.

6.3

Step 3: Connect the Ethernet Cable

• Connect an Ethernet cable (included) to the

LAN

port on the rear panel of the DVR.

Connect the other end of the Ethernet cable to a router on your network.

6.4

Step 4: Connect the Monitor

• Connect the included HDMI cable from the

HDMI

port to the TV or monitor

(recommended).

#LX400028; r. 1.0/16141/16141; en-US

Summary of Contents for M3100 SERIES



















































































































































































Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands

FLIR M3100 SERIES, Instruction Manual

Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands