FLIR M3100 SERIES Instruction Manual Download

Page: 71 / 178

Using the Main Menu

3. Click

to save changes. The system will restart to complete the formatting process.

15.3.17

Configuring Hard Drive Type

The system supports the following hard drive types:

•

Read-write HDD

: Normal recording hard drive.

•

Read-only HDD

: The system can playback data from this hard drive, but it will not re-

cord to it.

To set the hard drive type:

1. From the Main Menu, click

and then click

Storage>HDD Manager

2. Click the hard drive you would like to configure.
3. Under

Type

, select

Read-write HDD

Read-only HDD

4. Click

to save changes. The system will restart to complete this operation.

15.3.18

Configuring General System Settings

You can use the General menu to configure miscellaneous system settings.

To configure general settings:

1. From the Main Menu, click

and then click

Setting>General>General

#LX400028; r. 1.0/16141/16141; en-US

Summary of Contents for M3100 SERIES



















































































































































































Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands

FLIR M3100 SERIES, Instruction Manual

Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands