FLIR M3100 SERIES Instruction Manual Download

Page: 41 / 178

Backup

Display Area

: Select the split-screen mode. Double-click a video file to expand. Click

the controls inside the display area to do the following:

•

: View information about the video file.

•

: Start/stop a manual recording from the video file.

•

: Take a snapshot from the video file.

•

: Close the video file.

Hide/show file list.

Playback controls

•

: Playback files in sequence.

•

: Synchronize playback times.

•

: Play/pause playback.

•

: Stop playback.

•

: Previous frame.

•

: Next frame.

•

: Playback speed.

•

: Volume control.

Zoom Timeline.

Add Files

: Click to open back up video files.

Digital Zoom

: Click to activate digital zoom mode. Click and drag in the video to zoom

in. Right-click to unzoom.

Drag

: When digital zoom is activated, click to activate drag mode. Then click and drag

in the video to view different areas of the image.

Full-screen

: Click to open the player in full screen. Press

ESC

to exit full screen.

#LX400028; r. 1.0/16141/16141; en-US

Summary of Contents for M3100 SERIES



















































































































































































Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands

FLIR M3100 SERIES, Instruction Manual

Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands