FLIR M3100 SERIES Instruction Manual Download

Page: 55 / 178

Using the Main Menu

The Record Info menu shows the start and end times of recordings saved on the hard
drive.

To access the Record Info menu:

• From the Main Menu, click

and then select

Info>Record Info

15.2.3

Version

The Version sub-menu allows you to view information about the current firmware installed
on the system.

To access the Version menu:

• From the Main Menu, click

and then click

Info>Version

15.2.4

Alarm Status

The Alarm Status menu shows you a display of system alarms. Activated alarms are high-
lighted in white. Additional info such as channels that are currently detecting motion is
shown.

The following alarms are shown in the Alarm Status menu:

•

No HDD

: No hard drive is detected.

•

Disk Error

: Hard drive error detected.

•

Disk Full

: Hard drive is full.

•

Net Disconnection

: System is not connected to the network.

•

IP Conflict

: More than one device on the network is using the same IP address.

•

MAC Conflict

: More than one device on the network is using the same MAC address.

•

Local Alarm

: Not supported.

•

Net Alarm

: Not supported.

#LX400028; r. 1.0/16141/16141; en-US

Summary of Contents for M3100 SERIES



















































































































































































Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands

FLIR M3100 SERIES, Instruction Manual

Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands