FLIR M3100 SERIES Instruction Manual Download Page 23

Page: 23 / 178

Mouse Control

The mouse is the primary control device for the system. To connect a USB mouse:

• Connect a USB mouse to the USB port on the front or rear panel.

Left-button

• In live view, click to open the Navigation Bar. Right-click to close the navigation bar.
• In live view, while in a split-screen display mode, double-click an individual channel

to view it in full-screen. Double-click again to return to the split-screen display mode.

• While navigating menus, click to open a menu option.

Right-button

• During live view, right-click anywhere on the screen to open the Quick Menu.
• Within system menus, right-click to exit menus.

Scroll wheel

: In live view, use the scroll wheel to zoom in/out.

#LX400028; r. 1.0/16141/16141; en-US

Summary of Contents for M3100 SERIES



















































































































































































Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands

FLIR M3100 SERIES, Instruction Manual

Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands