FLIR M3100 SERIES Instruction Manual Download

Page: 107 / 178

Using FLIR Cloud™ Client for PC or Mac

•

Video Loss

: Select or preview the sound that will play for video loss alarms.

•

Disk Full

: Select or preview the sound that will play for disk full alarms.

•

Disk Error

: Select or preview the sound that will play for disk errors.

•

External

: Select or preview the sound that will play for external alarms (triggered by

sensor devices, which may not be supported on all systems).

•

E-map flashes when alarm occurs

: If the camera has alarms enabled and is added

to an e-map, a

appears on the e-map when an event occurs.

Note

Click

Save

to save changes.

17.15.4

Version

The Version menu shows you which version of the client software you are using. It is rec-
ommended to always run the latest version of the software from

www.flirsecurity.com/pro

#LX400028; r. 1.0/16141/16141; en-US

Summary of Contents for M3100 SERIES



















































































































































































Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands

FLIR M3100 SERIES, Instruction Manual

Search results

Summary of Contents for M3100 SERIES

Reviews:

Related manuals for M3100 SERIES

Brands by name

Popular brands