4
Onboard Weighing |
FT-30M
| www.flintec.com
Installation
Radio DIN Mount Assembly
Industrial vehicles have spare radio slots for after market hardware
devices. The FT-30M is sized to fit the DIN specification of radio slot.
A DIN radio kit comprises two ears, a zinc plated DIN cage, extraction
keys and screws.
In the truck cab, locate a suitable spare DIN radio slot. Remove the
existing cover plate. The DIN cage fits snugly into the opening right
up to the lip of the DIN cage. Before you push it in, pull the wiring
cables through the cage.
Once in place, use a small screwdriver or similar tool to pry down on
the securing tabs around the perimeter of the cage so they grip the
inside the opening. This will prevent the cage from slipping out or
tilting from the weight of the FT-30M.
The DIN cage is symmetrical, either way, top and bottom, left and
right. Some vehicles may already have an ‘ISO Mounting’, this means
the DIN cage is not required, the FT-30M will fit snugly into the
opening without the cage.
Connect the power and signal connectors to the back of the FT-30M.
Screw the DIN mounting ears to the FT-30M using the Torx screws
provided.
Push the indicator in to the DIN cage until it snaps into position.
Remove the FT-30M using the two extraction tools, place the keys
into the slots located in either ear and press downwards so they grip
inside the ears, gently pull on the keys and the indicator pulls out.
RAM-Swivel Mount
Locate the most convenient place for mounting the indicator. When
attaching the RAM mount ensure sufficient headroom, bear in mind
there will be cables wired into the back of the indicator, make sure to
allocate enough space for them. Device support manufacturers such
as RAM, Tallon and others supply an extensive range of RAM-Mount
and Tallon accessories.
Roof/ under dash mount
RAM Mount for dashboard�
1
/
4
- 20 UNC Camera thread
v1_000006_FT-30M 21/06/2016
