24
Onboard Weighing |
FT-30M
| www.flintec.com
Calibration - Twin Channel
Calibration
Twin mode allows two input channels to be calibrated separately and independently. The displayed weights are two weights to show
the rigid truck body (Channel 1) and the trailer weight (Channel 2).
On flat and level ground weigh and enter Tare (unladen) weights for channel 1 & 2. Load the vehicle to its legal maximum. Weigh and
enter the vehicle Net Payload for channel 1 & 2. Example shown is a rigid wagon and drag truck.
1� Home
Navigate to the menu.
Press :
2� Menu
Navigate through the User Functions.
Press :
3� Settings
Enter the Settings menu. (Pin code protected)
Press :
4� Pin code
Swipe up or down to enter pin code.
Press :
5� Set Up Menu
Enter the Weight Settings menu.
Press :
6� Weight Settings
Enter the Truck Modes menu.
Press :
7� Modes
Select Twin Channel mode.
Press
8� Set Up Menu
Enter the Calibration Menu.
Press
v1_000026_FT-30M 21/06/2016
