7
Onboard Weighing |
FT-30M
| www.flintec.com
Electrical Connections
Reverse polarity and over-voltage protected. Input load cell and sensors should be
in the 0-3.5mV/V range with typical impedance values of 120Ω-1000Ω. A variety of
sensors comprising multiple pairs of load cells, extensometers, deflection sensors,
air pressure sensors, encoders and fifth wheel load cells can be connected. The two
channel input allows for applications comprising two separate bodied trucks or
sensors with different inputs to be calibrated separately and independently (twin) or
together (dual). The FT-30M MENU provides weighing data and user definable settings
and SET-UP MODE, a password protected menu for service engineers and supervisors
which includes alarm set points, calibrations and diagnostics.
M12 Electrical Connector
The modular M12 connector makes the
electrical installation quick and easy. A
range of versatile M12 accessories means
that combinations of load cells and
sensors to suit thousands of applications
are easily connected. Power and signal
connectors are key-wayed, gendered
and thumb tightened. Junction boxes
are internally wired in parallel for all
analogue systems.
Connections & Junction Boxes
Extender Cables
Flintec DSB7 on-board weighing load cells have a 5 meter MALE M12 cable as standard. Extender cables for longer reach applications
are available in 1, 3, 5, 7.5 and 10 metre lengths.
1. Input Channel ONE, Max +/-19.0625 millivolts
2. Input Channel TWO, Max +/-19.0625 millivolts
3. COM port 1 RS232 port for printers
4. Power Input 9-32 Volts DC & 2 Alarm power outputs
5. COM port 2 RS485 port for LDUs. (To be added in 2017)
6. Panel mount and radio DIN fixing screws M3
7. 1/4” - 20 UNC camera mount to attach RAM-Mount 1” ball
8. DIN radio mount ear brackets - two required
Male - Female Extension Cable
Junction Boxes
v1_000009_FT-30M 21/06/2016
