6 Installation
6.1 Transmitter
FLUXUS G809
2020-06-25, UMFLUXUS_G809V2-2EN
26
6.1
Transmitter
6.1.1
Opening and closing the housing
The transmitter has 3 set screws which have to be unscrewed before the housing can be opened. After the installation of
the transmitter, make sure that the housing is closed correctly and that the set screws are tightened, see Fig. 6.1.
Caution!
Touching hot or cold surfaces
This may result in injuries (e.g., thermal damages).
→ Observe the ambient conditions at the measuring point during installation. Wear the required personal
protective equipment. Observe the applicable rules.
Important!
Do not use objects to open the housing which may damage the thread or housing gasket.
Fig. 6.1:
Transmitter
1 – set screw
1
1
