14 Data logger
FLUXUS G809
14.6 Information relating the data logger
127
UMFLUXUS_G809V2-2EN, 2020-06-25
14.6
Information relating the data logger
Aprox. 100 000 measurement data can be stored. Each measured value is stored with the corresponding totalizer and op
-
tionally further measurement and diagnostic data, see section 14.3.
According to the configuration of the data logger and the stored series of measured values, the available data logger will
be displayed in the menu item
Special Funct.\Instrum. Inform.
• Select
Special Funct.\Instrum. Inform.
• Press ENTER.
It is recommended to delete the old series of measured values before starting a measurement, see section 14.5.
The type and the serial number of the transmitter are displayed in the upper line.
The available data logger will be displayed in the lower line (here: 18 327 additional measured values can be stored).
• Press key BRK twice to return to the main menu.
It is possible to store max. 100 series of measured values. The number of series of measured values depends on the total
number of measured values stored in the previous series of measured values.
It is possible to display the time at which the data logger will be full during the measurement. All activated channels, total
-
izers and other values will be considered.
Press key
to scroll through the display of the upper line.
If the ringbuffer is activated and has overflown at least once, the following display will be indicated:
Special Funct.\Instrum. Inform.
Fig. 14.1: Information relating the data logger
x80x
-xxxxxxxx
Free
18327
full= 26.01/07:39
54.5
m3/h
last= 26.01/07:39
54.5
m3/h
