RV-8 70cc FLS Instructions
75
PILOT INSTALLATION (OPTIONAL)
Required for this section
Components
Tools
Adhesives/Building Materials
o
Pilot
o
Canopy
o
Hobby Knife with #11
Blade
o
Medium CA
⃞
1.
The foam cockpit floor has a dotted line denoting the cutout area. Take a #11 blade and
cut three of the four side of the rectangle as shown in the picture above. This will allow
you access for mounting the pilot. Once you mount the pilot, glue the foam back in place
using medium CA.
⃞
2.
The canopy hatch already has a cross-member for the pilot installed. In the image above,
the two slots are for two M3 screws and M3 washers to secure the pilot in place. They do
not have to be used.
