RV-8 70cc FLS Instructions
59
Baffle and Final Cowling Installation
⃞
1.
Locate the engine baffles. These are designed to fit the DA-70 The baffles are labeled
according to their locations. The lettering should face the outside of the baffles when
assembled.
L = Left Baffle
R = Right Baffle.
⃞
2.
Using medium CA, build the baffles as shown in the image above. Each piece has
markings that should assist you in assembly. On the corner of each baffle is two letters.
Match the letters for the proper assembly. Note the lettering should face to the outside of
the baffles.
Once assembled and the CA has fully cured, you can paint the baffles with enamel-based
paint to help with appearance and help resist damage from fuel or oil. There may be
some final tuning required. If you are using a different engine, you can use these as a
template or modify them as necessary.
