RV-8 70cc FLS Instructions
52
⃞
2.
After the tank is in position, route and trim your fuel lines appropriately. Your clunk line
should go to the carburetor or throttle body. The fill line should go to your fuel dot or
filling system. We recommend the McFueler Fuel Dot (FPMAMCFUELER). The vent line
should wrap around the back of the tank(s) and pass back in front of the tank(s). It should
then exit the bottom of the fuselage as shown in the image above. After the vent line
exits the fuselage, use a cable tie around the fuel line to prevent it from slipping back into
the fuselage. Don’t over-tighten the cable tie, as air and fuel will need to vent from this
line. Be sure to keep your fuel line away from components that get hot (like your exhaust
or cylinder heads) and route it in such a way that it will not bounce around or chafe on
any of the interior structure of the fuselage.
