RV-8 70cc FLS Instructions
69
FINAL ASSEMBLY
RADIO INSTALLATION
Required for this section
Components
Tools
Adhesives/Building Materials
o
Fuselage Assembly
o
Receiver
o
Receiver Switch
o
Aura Professional
(Optional)
o
Receiver Batteries
o
Hook and Loop Straps
o
Adhesive-Backed Hook
and Loop Tape
o
Tie-Wraps
o
Hobby Knife with #11
Blade
o
2mm Hex Driver
o
#1 Phillips Screwdriver
o
Thin CA
⃞
1A.
If you are using an Aura Professional, it can be mounted forward of the rudder servo
location as shown in the picture above. There are pre-cut holes to start the mounting
screws easily.
DO NOT
use hook and loop tape to mount the Aura.
Use a #1 Phillips screwdriver to thread an Aura mounting screw into each of the pre-cut
holes in the mounting tray. Remove the screw and apply a small amount of thin CA to
