RV-8 70cc FLS Instructions
48
Quique’s Tips (continued):
o
For the most linear throttle response, adjust the throttle linkage length to balance the end
points for your throttle servo. You do NOT want your end points to be mismatched (example:
60/120). Get your end points as close to one another as possible (example: 114/116) for the
most linear throttle response.
IGNITION INSTALLATION
Required for this section
Components
Tools
Adhesives/Building Materials
o
Fuselage Assembly
o
Ignition
o
Ignition Switch
o
Ignition Battery
o
Regulator (if applicable)
o
Hobby Knife w/#11 Blade
o
Hook and Loop Strap (2)
o
Adhesive-Back Hook and
Loop Tape
⃞
1.
Locate the ignition switch hole towards the nose of the fuselage. Note that there are
switch locations on both sides of the fuselage for your preference. Use a hobby knife with
a #11 blade to remove the covering from the hole of your choice. Test fit your switch and
modify the hole if needed. Secure it in place using the screws included with your switch.
If your switch mounting screws thread into metal, be sure to apply blue thread lock. DO
NOT apply blue thread lock if they thread into plastic.
