RV-8 70cc FLS Instructions
64
⃞
1.
The 63mm motor standoffs used are threaded for
¼
-20 bolts on the firewall side and
5mm bolts on the motor side.
⃞
2.
Using 5-minute Epoxy, glue the (4) 3mm plywood washers to the firewall. This will
provide the correct clearance between the spinner and cowling.
⃞
3.
Use (4) 1/4 x 3/4-inch socket head cap screws and (4) 1/4-inch washers to mount the
motor. Be sure to apply blue thread lock when securing them.
⃞
4.
Install the motor using (4) M5 x 10 socket head cap screws with (4) M5 washers. Be sure to
use blue thread lock when securing them.
