RV-8 70cc FLS Instructions
44
⃞
3.
Use a
¼
-20 x 1-1/2-inch screw,
¼
-inch flat washer, and 30mm standoff to pull the blind
nut into the back side of the firewall. Once fully seated into the firewall, you may apply
some medium CA to help secure the blind nut. Ensure that you don’t get any adhesive on
the threads of the blind nut. Let the CA fully cure before moving to the next step.
⃞
4.
Mount the engine (without the exhaust) to the firewall using (4) 30mm engine standoffs,
(4)
¼
-20 x 1-1/2-inch socket head cap screws and (4)
¼
-inch flat washers. Be sure to apply
blue thread lock to the motor mount screws. The order of components is as follows:
o
¼
-20 x 1-1/2-inch Socket Head Cap Screw
o
¼
-inch flat washer
o
Engine
o
30mm Engine Standoffs
o
Firewall
o
¼
-20 Blind Nut
