Creator3 User Guide | www.flashforge.com
400-699-1063
66
Method 1:
Click
[
Edit
]
--
[
Delete
]
Method 2:
Press the shortcut
Delete
⑦
Auto Layout All
Click
[
Edit
]
--
[
Auto Layout All
]
after loading one or more than one models, all
models will be placed automatically as automatic placement rule.
⑧
Repair Models
Click
[
Edit
]
--
[Repair Models]
to repair models.
⑨
Supports
Click
[
Edit
]
--
[Supports]
to enter supports setting interface.
6.2.14 Print Menus
①
Connect Machine
You can connect the Creator3 with your PC via Ethernet Cable or WiFi.
Note:
The machine icon on the bottom right displays the connection status:
Connected
Disconnected
Method 1
：
Connect Via Ethernet Cable
a. Connect your Creator3 with your PC via an Ethernet cable.
b. Turn on your Creator3 and start FlashPrint.
c. Click
[Print]--[Connect Machine]
,
then select Ethernet in the
[Connection Mode]
option and select machine you want to connect in
[Select Machine]
option. If you can
not find your machine, click the
[Rescan]
button to scan your machine and select it.
Finally click
[Connect]
button to connect to the printer. If you still can not find your
machine after rescan, it means you haven’t installed the driver in the software.
