Creator3 User Guide | www.flashforge.com
400-699-1063
29
X axis Calibration
1. X axis calibration:
Tap [X axis calibration].
2. Extruder begins to heat up.
3. Extruder begins to do the calibration
：
Right extruder prints a base line
perpendicular to X axis in the middle of
the platform at coordinates(0,100),
then left extruder prints a base line
perpendicular to X axis in the middle of
the platform at coordinates(0,-100).
4. Choose whether the two lines
coincide: Tap [next] to choose whether
the two lines coincide: Yes/No.
1
2
3
4
3