Creator3 User Guide | www.flashforge.com
400-699-1063
64
reloading the files, extruder configuration information and model position will be the
same as the configuration during saving.
Method 2:
Click on
[File]
--
[Save as...]
to save the model as project file .fpp or .stl and .obj.
For .stl and .boj, models are integrated as one(include support part). If load it again,
only the position of the model was saved, not included the printing parameters.
③
Preferences
Click
[File]--[Preferences]
, you can choose language and if needs detecting update
when start.
●
Language:
The software supports several languages, namely, Chinese (simplified
Chinese and traditional Chinese), English, French, Korean, Japanese and so on.
●
Font Size:
Set the font size.
●
Check for Update after start up:
It is used to preset if it is necessary to activate the
online automatic update function, if choose yes, every time when you open software, it
can online detect if it is a new version software, once new version found, it will
reminds users to download and install new version firmware.
●
Auto layout newly-imported model:
Set Yes or No.
●
Preferred Extruder:
Right/Left Extruder.
●
Printing Window Type:
Including Basic Mode and Expert Mode
