Creator3 User Guide | www.flashforge.com
400-699-1063
73
7.2 Print Methods
After generating the Gcode file, you can transfer it to your Creator3. You can transfer
the file through Ethernet Cable or WiFi or USB stick.
7.2.1 Print from Computer ( Ethernet Cable connection)
①
Connect your Creator3 with your PC via a Ethernet cable.(Please refer to
6.2.13
)
②
Turn on your Creator3, level the build plate and load the filament.
③
Click
[
]
and transfer your Gcode file to your Creator3. After completing
transference, the printer will heat up automatically. And when heating finishes, the
printer will start to build the model.
④
When your PC connects with FlashPrint successfully. The status box on the
bottom right displays the real-time nozzle temperature. After finishing preheating,
your Creator3 starts the print job directly.
