Creator3 User Guide | www.flashforge.com
400-699-1063
6
②
Do not touch the nozzle after finishing printing.
③
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts.
④
Do not operate the device while you are tired or under the influence of drugs,
alcohol or medication.
· Cautions
①
Do not leave the device unattended for long.
②
Do not make any modifications to the device.
③
To lower the build plate before loading/unloading filament. (The distance between
the nozzle and build plate should be kept for at least 50mm)
④
Operate the device in a well-ventilated environment.
⑤
Never use the device for illegal activities.
⑥
Never use the device to make any food storage vessels.
⑦
Never use the device to make any electrical appliance.
⑧
Never put the model into your mouth.
⑨
Do not remove the models with force.
⑩
Never connect the device with network cable longer than 3m.
· Environment Requirements
Temperature: RT 15-30℃
Moisture: 20%-70%
· Place Requirements
The device must be placed in a dry and ventilated environment. The distances of the
left, right and back side space should be at least 20cm, and the distance of the front
side space should be at least 35cm.
