Creator3 User Guide | www.flashforge.com
400-699-1063
58
Creator3 can print a model with two extruders cooperating with each other, tap
to choose Left/Right extruder when slicing.
NOTE:
Before using dual extruder duplicate or mirror printing, Creator3 must do Z
axis calibration first; Before using two extruders cooperate to print a model, Creator3
must do Z axis, X axis and Y axis calibration first.
6.2.10 Supports
After loading the model, click
[
Edit]
--
[Supports
]
or click the
Supports
icon directly,
then you will enter the support edit mode (as shown in the picture below). Click
[
Back
]
to exit when you finish editing.
6-10
