42
[Setting]-[language]
Tap [language]to enter language setting interface
1. Tap to choose the display language.
2. Page turning: Turn to the up/down menu
[Setting]-[WiFi]
Turn on WiFi function, the device can connect to network:
1. Remote file transfer and print.For details, see page 29 network transfer print.
2. Remote control device print state,for details, see page 34 WiFi connection camera.
[Setting]-[WLAN hotspot]
Turn on WLAN hot-spot function, the device can connect to PC hot-spot:
1. Remote file transfer and print,for details, see page 30 hotspot connection print.
2. Remote control device print state,for details, see page 33 WLAN hotspot connection camera.
11.
Light Bar Control:
To turn on/off the light bar control;
12.
Factory Reset:
Return to factory setting;
13.
Update:
To update the firmware version;
14.
Platform Heat Preservation:
When the printing finished, the platform will keep heating the current setting time；
15.
Test Extruder Sensor:
16.
Steel Brush /Rubber：
